Atari MultiTOS

Ever since I found a way to install Atari MultiTOS (MTOS) on Steem, I have been experimenting it with SpeedoGDOS and Atari Works. They work pretty well on Steem. It's fast enough at 128MHz. It is very slow on the real Atari ST (8MHz). MTOS works just just like Macintosh MultiFinder but with pre-emptive multitasking. Atari engineers back then put a lot of efforts to make it work really well. It's too bad Atari management abandoned it. Of course many music apps do not work under MTOS and without music apps there is no actual use of Atari's. Steinberg and C-Lab did not want to embrace MTOS to make their apps run under MTOS.
I want to write some apps on Atari, but GEM is very limited in terms of provided APIs so developers had to reinvent a lot of things for their apps. To make a very responsive apps I need to write assembly apps.

Comments

Post a Comment

Popular posts from this blog

Transmitting video with HackRF

I just got my HackRF and was playing with it ever since. One of my interests is Digital Amateur TV. I was searching for solutions to do DATV using HackRF. Finally, I was able to test transmitting video via HackRF. I followed the following 2 sites and modified commands and dvbt-hackrf.py. 1. http://photohamrad.blogspot.com/2015/06/transmitting-video-with-hackrf-blue.html 2. https://irrational.net/2014/03/02/digital-atv/ I only tested on 441MHz. I will need to tweak on ffmpeg switches and python code to make the video smoother. Right now the video only shows the initial image and no movement. avconv may be better but I was not able to install it, so I used ffmpeg. My next challenge is to transmit in DVB-S2 and receive the video with Satellite set-top receiver. So far, I am not able to build dvb-s package. I also ordered Adalm Pluto from Arrow Electronics but they have not shipped it. Environment: Transmitter PC Lenovo ThinkPad X201 Core i5 CPU 4GB RAM Ubuntu Mate 18.04 H...
Read more

Transmitting video with ADALM PLUTO to Satellite receiver

Image
I was able to transmit video using ADALM PLUTO and DATV Express to a Satellite receiver. ADALM PLUTO is modified to transmit up to 6GHz. The software I used are DATV Express and vMix Basic. They are both free. DATV Express is beta so use at your own risk. The laptop is Acer Aspire Timeline X Core i7 with 8GB RAM. The receiver is a cheap DVB-S2 receiver from China. Nothing fancy. I cannot find any brand name or model number. I will not be able to upgrade to a newer firmware. I bought it for $21 from eBay. The wifi dongle came broken. That does not affect our project. But with wifi dongle, I can watch YouTube from this little box. The replacement is on the way from China. The antenna did not come with it. I borrowed one from USB TV tuner I had. This is the exact model as shown in these videos. https://www.youtube.com/watch?v=qknWQi54oCo https://www.youtube.com/watch?v=m290NR5pEfY&t=1121s Since I've never used satellite receiver before, finding the right settings for...
Read more

Python GUI app to control X6100 Armbian

 [Main.py] import sys from PyQt5.QtWidgets import QDialog, QApplication from FirstApp import * import Hamlib import time cur_mode="CW" #print("Hamlib") Hamlib.rig_set_debug(Hamlib.RIG_DEBUG_NONE) my_rig = Hamlib.Rig(Hamlib.RIG_MODEL_NETRIGCTL) #my_rig.set_conf("rig_patname","192.168.1.248:4532") #print("here") my_rig.set_conf("rig_pathname","127.0.0.1:4532") my_rig.set_conf("retry","5") my_rig.open() #print("hamib open") cur_freq = my_rig.get_freq() #print("Current freq",cur_freq) (mode, width) = my_rig.get_mode() if mode==1:     cur_mode="AM" elif mode==32:     cur_mode="NFM" elif mode==2:     cur_mode="CW" elif mode==128:     cur_mode="CWR" elif mode==8:     cur_mode="LSB" elif mode==4:     cur_mode="USB" #print(cur_mode) #print(cur_freq,mode) #my_rig.set_freq(Hamlib.RIG_VFO_A, 28000000) #time.sleep(5) set_mode=...
Read more